Career Opportunities:

DSP Audio Algorithm Engineer

The Audio DSP Engineer will be responsible for:

· Development of audio algorithms.

· Optimization of Audio algorithms for various DSP architectures

· Integrate to algorithms to audio frameworks

· Collaborating in a team environment across engineering disciplines.

· Performance analysis of Audio algorithms for DSP cores.

· Ability to work independently and contribute

· Willing to work at Client location / Onsite (domestic and international).

Preferred Qualifications

· Excellent programming skills in C/C++.

· Experience in optimization (Assembly/Intrinsic) of Audio algorithms in any of the DSP architecture.

· Experience in audio algorithm testing both bit exactness and spectral verification.

· Experience in Fixed point algorithm design and implementation.

· Experience in Audio DSP Board Bring up, Device drivers, Firmware, Boot Loaders, Tool chains & Build systems.

· Excellent analytical skills for troubleshooting and issue resolution. Possess high capability in driving issues to closure.

· Proven ability in defining and creating process documents for all stages of development

· Excellent debugging skills.

· Self-motivator and an excellent team player.

· Possess outstanding written and verbal communication skills. Ability to communicate design rationale and build consensus with the Team.

Email: careers@ignitarium.com

Autosar

• Should be able to handle all phases of SDLC - Requirement, Design, Coding and Testing/Validation
• Come up with robust software designs making use of good design practices
• Should be involved in development of device drivers/complex device drivers/Hardware Abstraction software in C [MISRA complaint] according to AUTOSAR MCAL specifications on advanced Multicore controller and processors
• Should be able to configure and integrate the different modules in AUTOSAR [COM, Memory and Diagnostics]
• Build the software using cross compilers and debug the software on the target hardware
• Perform Static analysis, Unit and Functional Testing
• Participate in technical reviews and brainstorming sessions organized within the team

Email: careers@ignitarium.com

Automotive

. Having extensive hands-on experience in developing Logic Design and Interface Design for complex algorithms

·Good knowledge of 16/32 bit Microcontroller architectures.

·Experience/exposure to vehicle in-network protocols like CAN/ LIN etc.

·Good Knowledge in the implementation and testing of Automotive Diagnostic Protocol and services

·Understanding of operating system concepts like Scheduling, Interrupts, Memory and Process management

·Preferred to have working Experience in LINUX or QNX

·Strong skill in C language (MISRA C) for DSPs in Automotive domain

·Proven experience in embedded systems design with pre-emptive, multitasking real-time operating systems

·Understand project requirements, customer use cases & specifications for features and convert them to standout software.

Email: careers@ignitarium.com

Design Verification Engineer

Must have
.Hands-on experience and expert-level knowledge in RTL design and coding
.Hands-on experience and expert-level knowledge in SoC integration of ARM core-based designs.
.Experience in working with AMBA Bus- AXI, AHB, APB.
.Hands-on Experience with Lint and CDC.
.Experience with FPGA based designs or FPGA prototyping
.In-depth understanding of Verilog/VHDL and ARM SoC architecture
.Hands-on experience and expert-level knowledge in ASIC Synthesis
.Hands-on experience and expert-level knowledge in Static Timing Analysis
.Experience in equivalency checking
.Bachelor’s Degree in Electronics Engineering / Master’s Degree.

Preferred
.Experience in Ethernet, PCIe
.Experience in the networking domain
.Experience in PERL, TCL. Python
.Tools – Cadence / Synopsys toolsets

Email: careers@ignitarium.com

DFT Engineer

.Hands on experience in Inserting Scan and generating ATPG vectors for
.Stuck-At and At-Speed Faults. In-depth experience in analysing and improving scan coverage.
.Hands on experience in MBIST (insertion and simulation)
.Experience in Boundary Scan, inserting tap controller and P1500
.Experience in RTL based and netlist-based insertion flows
.Experience in DFT simulation with and without SDF Experience in Synthesis and formal verification tools
.Experience in characterization (DC Characteristics)
.Experience in generating TDL for ATE and working closely with ATE team during bring-up phase
.Good exposure to DFT tools from Mentor, Synopsys and Cadence
.Good scripting know-how in Perl and TCL.
.Experience in Static Timing analysis preferred.
.Bachelor’s Degree in Electronics Engineering / Master’s Degree.

Email: careers@ignitarium.com

General Embedded Engineer

.Hands on experience in developing low level software for microcontroller
based environments with ARM/Cortex processors or similar.
.Knowledge of DSP concepts.
.Experience in all aspects of designing and developing SW in C/C++ language
for embedded platforms.
.Advance level knowledge of modern microprocessor architecture – MMU,
Caches, Exceptions, interrupts, instruction sets etc.
.Experience in working with multiple common h/w interfaces like USB,
Ethernet, PCIe, DDR controller, DMAC etc.
.Device driver or stack development in at least one major Operating system
for at least one complex interface.
.Experience in SW protocol stacks like USB, TCP/IP, File system etc.
.Experience in Board Bring up, Device drivers, Firmware, Boot Loaders, Tool
chains & Build systems.
.Understand project requirements, customer use cases & specifications for
features and convert them to standout software.
.Initiate and drive Test strategies and Test plan design for software.
Preferred
.Experience in Labview / Matlab
.Experience in scripting PERL/TCL/Python
.Experience in Networking/Energy/Medical/Security/Auto/Video domain
.Experience in Android.
.Experience in writing device drivers in Linux, Boot loader development and
porting/migration.

.Working with software architect to define, develop prototypes for new ideas
or solutions for customers.
.Excellent analytical skills for troubleshooting and issue resolution. Possess
high capability in driving issues to closure.
.Excellent programming skills using C/C++. Familiarity with Linux Internals.
.Multimedia drivers (camera/display/video). Experience in Video Decoder/
Encoder/HDMI drivers is highly desirable.
.Excellent debugging skills. Well versed in using tools like gdb, kgdb &
profilers.
.Self-motivator and an excellent team player.
.Possess outstanding written and verbal communication skills. Ability to
communicate design rationale and build consensus with the Team.
.Prior experience of designing Test plans for features from scratch.

Experience
.2-8 years’ experience in C programming on Linux/RTOS or other embedded
environments
.Bachelor’s Degree in Electrical Engineering or Computer Science/ Master’s
Degree.

Email: careers@ignitarium.com

Android Framework Engineer

The Android Framework Engineer will be responsible for:

· Ownership of design, development, and validation of software modules on development devices like Pixel phones.

· Responsible for any bugs reported on customer hardware, analyzing the logcat, fixing the issue, unit & system tests.

·Collaborating in a team environment across engineering disciplines and locations.

·Performance analysis using various tools and come up with ideas for optimization in terms of memory & time.

·Work closely with various core tech teams to develop tools, reusable code.



Preferred Qualifications

·Excellent programming skills in C++ and C.

·Strong working experience on HAL/HIDL (Audio/ Multimedia/ Network/ Graphics/ Sensor/ Vehicle HAL)

·Customization of HAL/HIDL based on customer requirements.

·Should have working knowledge on building android AOSP

·Good to have understanding of Application framework layers (Service, Manager, System, Activities)

·Should have working knowledge on Vendor configurations, Device Manifest, Vendor implementations.

·Initiate and drive Test strategies and Test plan design for software

·Understanding of OpenGL, Vulkan, Mesa is a plus

·Understanding of JAVA or Kotlin is a plus

Email: careers@ignitarium.com

Physical Design Engineer

Should have in depth experience in Floor-planning, CTS, Power routing, place and route, timing closure, DRC and LVS
Should have worked on the latest technology nodes (14nm or lesser).
Must have experience in Static timing analysis
Must have experience in Physical verification and appropriate fixes
Should have worked on block level and top-level designs
Good to have worked on designs without a customer flow.
Strong problem-solving skills and communication skills.
Ability to mentor and work closely with junior engineers.
Bachelor’s Degree in Electronics Engineering / Master’s Degree.

Email: careers@ignitarium.com

AMS Verification Engineer

Senior experienced roles should be able to define and implement the mixed-signal verification methodology and do hands-on verification.
Junior experienced roles should be to develop verification environment and test suites
Must have hands-on experience and expert-level knowledge in Analog Mixed-Signal simulations
HVL based methodologies (UVM/OVM/eRM)
Experience with SV Real Modelling and SPICE models
Experience in verifying SERDES, LNAs, Filters, ADCs and DACs,DACs and Power circuitry.
Preferred Exposure in Low power verification.
PERL, TCL. Python
Tools – Cadence/Synopsys/Mentor, Spice
Bachelor’s Degree in Electronics Engineering / Master’s Degree.

Email: careers@ignitarium.com

Automotive- Testing

.Good knowledge of 16/32 bit Microcontroller architectures.

·Experience/exposure to vehicle in-network protocols like CAN/ LIN etc

·Good Knowledge in the implementation and testing of Automotive Diagnostic Protocol and service

·Understanding of operating system concepts like Scheduling, Interrupts, Memory and Process management

·Initiate and drive Test strategies and Test plan design for software

·Exposure to different operating systems.

·Experience in Unit testing, structural coverage, MC/DC, RTRT/LDRA

·Exposure in C/C++/ python

·Test automation using python

·Knowledge in MISRA rules

Email: careers@ignitarium.com

Embedded Test & Automation

.Testing software products through the use of systematic tests to develop, apply, and maintain quality standards.

·Part of the software QA team, responsible to ensure software meet specifications, customer expectations, and all QMS/regulatory requirements

·Creating Test Designs, Test cases and Automation in Python or any other framework suited for the embedded products.

·Focus on developing Test Cases, Test Execution, Test Report Generation, Bug Management and Automation scripts

Preferred Qualification

.Solid programming experience in C/C++ or object oriented Python

·Experience in Testing and Test automation using Python or Standard tools

·Experience in Testing Embedded systems

·Experience in all aspects of design, develop and implementation of automation framework

·Experience driving Test strategies and Test plan design for software.

·Familiarity with Linux and Excellent debugging skills. Well versed in using tools for debugging test cases

·Possess outstanding written and verbal communication skills. Ability to communicate design rationale and build consensus with the Team. Prior experience of designing Test plans for features from scratch

Email: careers@ignitarium.com

Functional Safety Engineer

Align the architecture for System Software to meet the functional safety requirements with respect to ADAS, Car Audio, Digital Cockpit and Telematics.
Assess and participate in reviews for automotive products at different development stages during the product lifecycle
Taking accountability for Technical Safety Concepts of the assigned projects
Determine the safety performance and based on safety analysis for target architecture
Derive and align the necessary verification and validation activities with the business units and central test teams or supplier.
Support for technical inspections, confirmation reviews
Preferred qualifications

· Excellent programming skills in C / C++.

· Hands-On experience of Automotive Embedded system development.

· Hands-On experience of driver/MCAL development.

· Good understanding of Requirements, Design, Implementation, Testing of complex and large-scale embedded system projects.

· Hands-on experience in debugging using Lauterbach, Trace32, CCS, GDB, etc.

· Hands on experience of developments of safety critical SW with ASIL-B or higher.

· Strong Understanding of ISO26262 standard.

· Verification/Validation of Code using tools like: RTRT, LDRA, KLOCWORK etc.

· Strong understanding of MISRA coding standards. Knowledge of RTOS concepts and understanding of software architecture is desirable

Email: careers@ignitarium.com

Embedded Autosar Engineer

Responsible to come up with robust software designs making use of good design practices

Will be involved in development of device drivers/complex device drivers/Hardware Abstraction software in C [MISRA complaint] according to AUTOSAR MCAL specifications on advanced Multicore controller and processors

Will handle all phases of SDLC - Requirement, Design, Coding and Testing/Validation

Configuring and integrating the different modules in AUTOSAR [COM, Memory and Diagnostics]

Build the software using cross compilers and debug the software on the target hardware

Perform Static analysis, Unit and Functional Testing

Participate in technical reviews and brainstorming sessions organized within the team



Preferred Qualifications



Excellent programming skills in C

A minimum of 2+ years in AUTOSAR MCAL development or in AUTOSAR module integrations

Expertise in DaVinci configurator and developer/EB Tresos

Experience with MISRA-C Coding practices, Static Analysis Tools and Unit Testing Tools

Have an idea about AUTOSAR software component development and RTE generation

Good knowledge of SW development process and related standards (ASPICE) beneficial

Deep understanding of CAN / CAN-FD / LIN/ Ethernet protocols including Vehicle diagnostics & related tools

Experience in design tools like EA/Rhapsody is desirable

Good understanding of microcontroller architectures (Single core/Multi Core)

Experience in using test tools in automotive SW development like CANoe, CANape and CANalyser

Experience in inter process and inter processor communication mechanisms

Knowledge about scripting languages (CAPL, Python)

Good understanding of OS Fundamentals & Preferably AUTOSAR OS

Email: careers@ignitarium.com

Deep Learning Engineer

Hands on with Python/C++
Hands on with CV, CNN, Tensorflow, Keras, caffe, Pytorch , Image processing
Hands-on experience with internals of networks (CNN/, RNN,/ DNN, /BNN,/LSTM, SSD etc). Customization of NN and improving performance.
Good analytical and problem-solving skills
Knowledge of computer architecture
Can build prototypes leading to production worthy solutions
Contribution in research communities, publishing papers or participation in Github projects related to machine learning

Email: careers@ignitarium.com